Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
101
【Parameter】
port‐id：ThePONportnumberofONTthatneedtoquerycapability.
ont‐id
：
ThenumberofONTthatneedtoquerycapability
【Description】
This command is used to query the user configuration capabilities of ONT. Check whether ability match
by comparing the user configuration capabilities with real ability
【Example】
QuerytheuserconfigurationcapabilitiesoftheONT1onthePON13
ofont1onthePON13
OLT(config‐interface‐epon)#showontconfig‐capability131
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Port:13
ONT‐ID:1
NumberofPOTSports:0
NumberofETHports:
4
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
18.18showontoptical‐info
【Command】
showontoptical‐infoport‐idont‐id
【View】 eponview
【Parameter】
port‐id：
the PON port number of ONT that need to query the light-module information
ont‐id
：
thenumberofONTthatneedtoquerylightmodule
【Description】
This command is used to query the relevant information of the ONT light-module on the PON port.
Usually during the routine maintenance and troubleshooting of ONT, you can use this command to query
ONT light module information,in order to determine whether the ONT light module is normal.
【Example】
Querythelight‐moduleinformationofont1onthePON13
OLT(config‐interface‐epon)#showontoptical‐info131
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Voltage(V):3.49
Txopticalpower(dBm):1.7181
Rxopticalpower(dBm):‐5.8670
Laserbiascurrent(mA):9.25
Temperature(C):41.76
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
18.19showontversion
To Next Page
Loading...
General