C-Data FD1216S User Manual

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
74
【View】
Configview
【Parameter】
Vlan-id: Clear bind table by vlan
all: Clear all entries
static:Clear all static entries
dynamic：Clear all dynamic entries
ip-address：Clear all entries with the specified IP address
【Description】
Clear bind-table entries
【Example】
OLT(config)# dhcp-snooping bind-table clear all
13.14 dhcp-snooping bind-table write-delay
【Command】
dhcp-snooping bind-table write-delay time
【View】
Configview
【Parameter】
time: Delay time
【Description】
Delay time of writting bind table into flash，DHCP to monitor After the binding
table of DHCP updated, waiting for a set time,and then written to flash.
【Example】
Delay 240 secondsto writte bind table into flash
OLT(config)# dhcp-snooping bind-table wtite-delay 240
13.15 dhcp-snooping bind-table delete-time
【Command】
dhcp-snooping bind-table delete-timetime
【View】
Configview
【Parameter】
time: Entry delete time
【Description】
Set the delete time of monitoring bind-table . When they arrive in the lease time, dynamic table will not
be deleted immediately, but the delay to the set time.
【Example】
Until it reach the lease after 240 seconds, dynamic table will be deleted
OLT(config)# dhcp-snooping bind-table delete-time 240

C-Data FD1216S Specifications

General

Brand	C-Data
Model	FD1216S
Category	Switch
Language	English