EasyManua.ls Logo

C-Data FD1216S - Dhcp-Client Renew; Dhcp-Client Release; Dhcp-Client Option60

C-Data FD1216S
115 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
13
【description】
Thiscommandisusedtothe3layerinterface,openorclosethefunctionofDHCPclient.
【example】
OpentheDHCPclientfunctionofvlanif1interface.
OLT(config‐interface‐vlanif‐1)#dhcp‐clientenable
3.7dhcp‐clientrenew
【command】
dhcp‐clientrenew
【view】vlanifview
【parameter】
【description】
Thiscommandisusedtothe3layerinterface,opentheinterfaceofrenewswith.thiscommand
willbeusedwhenweneedactivelyto makeIP addressofinterfaceandthen requestmessages
thatincluderenewalorrepeated
requirementwillbesend.
【example】
Opentherenewswithofvlanif1interface.
OLT(config‐interface‐vlanif‐1)#dhcp‐clientrenew
3.8dhcp‐clientrelease
【command】
dhcp‐clientrelease
【view】vlanifview
【parameter】
【description】
This command is used to the 3 layer interface and free the IP of that.this command will be
executedwhen we need to deletetheipaddress applieddynamicallyandthentouchedrelease
messagestonoticedtheDHCP
interfaceaboutfreedomofinterface.
【example】
FreetheIPofvlanif1
OLT(config‐interface‐vlanif‐1)#dhcp‐clientrelease
3.9dhcp‐clientoption60
【command】
dhcp‐clientoption60option60
nodhcp‐clientoption60

Table of Contents