Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
83
15.4commit
【Command】
commit
【View】 dba‐profileview
【Parameter】
【Description】
Thiscommandisusedtosubmitthecurrentdba‐templateconfiguration,onlysubmitsuccessfully,
allofthedbatemplateparametersconfigurationwillonlytakeeffect.
【Example】
Submitthecurrentdbatemplateconfiguration
OLT(dba‐profile‐10)#commit
16.ONTconfigurationofthelinetemplate
16.1ont‐lineprofile
【Command】
ont‐lineprofile(profile‐idprofile‐id|profile‐nameprofile‐name)
noont‐lineprofile(profile‐idprofile‐id|profile‐nameprofile‐name)
【View】 configview
【Parameter】
profile‐id
：
LinetemplatenumberofEPONONT,itis
used to identify uniquely a line template
profile‐name
：
Line template name of EPON ONT, The default template name is“ line‐
profile_x”,"x"istheactualtemplatenumber.
【Description】
ont‐lineprofile :Command is used to create and enter the ONT‐line template pattern, or enter
thecreatedtheONTlinetemplatepattern.theONTlinetemplatedescribes
thebindingrelations
ofT‐CONTandDBAtemplate,theQoSmodelofbusinessflow,themappingrelationshipofthe
GEMPortandONTbusiness,itismainlyusedtoconfigureinformationabouttheDBA,T‐CONT
and GEM Port,Afterthe command executed successfully, you can enter intothe
corresponding
EPON ONT line template configuration mode, and set the related properties in the ONT line
template.
【Example】
Create the EPON ONT line template whose id is 10, it can be referenced when adding ONT.
OLT(config)#ont‐lineprofileprofile‐id10
OLT(ont‐lineprofile‐10)#
16.2llid
To Next Page
Loading...
General