C-Data FD1216S - 11 Acl; Time-Range

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
54
11.ACL
11.1time‐range
【Command】
time-rangetime-name { start-timetoend-timedays | fromtime1date1 [ totime2date2 ] }
no time-rangetime-name
【View】confiigview
【Parameter】
time-name
： the name of time period, Configure ACL rules refer to this name 。
start-time
： The start time of relative time period。identify a time range with the end-time，days
define date,Three parameters to determine a relative time period。
end-time
： The end time of relative time period。identify a time range with the start-time，days
define date，Three parameters to determine a relative time period。
Days
： The exact time of relative time period 。
 Mon： Monday
 Tue： Tuesday
 Wed： Wednesday
 Thu： Thursday
 Fri： Friday
 Sat： Saturday
 Sun： Sunday
 daily：daily
 off-day： Saturdays and Sundays
 working-day：Monday to friday
time1date1
： The starting time and date of absolute time period。
time2date2
： The end time and date of absolute time period
【
Description 】
The ACL period is divided into relative and absolute time：
Relative time： Refers to the periodic time，for example, Every Monday at 8:30 to
18:30。
Absolute time: From a specific time to another time， For example, on June 8, 2006
12:00 until 18:00 on August 8, 2006
。
【Example】
Example： Configure a cycle period worktime,the effective time is 8:00 to 18:30 on every
Monday。
OLT(config)#time‐rangeworktime08:00to18:30mon
