C-Data FD1216S - Ont Confirm; Ont Cancel

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
92
template10,thebindingbusinesstemplate10.
OLT(interface‐epon)#ontadd12mac‐auth22:22:22:22:22:22ont‐lineprofile‐id10ont‐
srvprofile‐id10

18.2ontconfirm
【Command】
ont confirm port‐idmac‐authmac ont‐lineprofile‐id ont‐lineprofile‐id ont‐srvprofile‐id
ont‐srvprofile‐id
ont confirm port‐id allmac‐auth ont‐lineprofile‐id ont‐lineprofile‐id ont‐srvprofile‐id
ont‐srvprofile‐id
【View】 eponview
【Parameter】
port‐id
：  The EPON port number of the confirmed ONT. 
all：
Batch to confirm all automatically discover ONT under the EPON port 
sn‐authsn‐value
： Specifies the MAC of the ONT authentication. 
ont‐lineprofile‐idont‐lineprofile‐id
： The specified numberof the ONT binding line template 
ont‐srvprofile‐idont‐srvprofile‐id
： The specified numberof the ONT binding businesstemplate 

【Description】
This command is used to confirm ONT under automatic found condition. If OLT enable find automatically,
OLT will get ONT the registration information after add the ONT, and ONT is in a state of discovery
automatically. The command Can be used to batch certified ONT.

【Example】
Confirmall of automatically found ONT under EPON OLT PON port 1, and bind the ONT line template10,. 
OLT(interface‐EPON)#ontconfirm1allsn‐authont‐lineprofile‐id10ont‐srvprofile‐id10
NumberofONTsthatcanbeadded:2,success:2


18.3ontcancel
【Command】
ontcancelport‐id(all|mac)
【View】 eponview
【Parameter】
port‐id:TheportnumberofEPONneededtodelete
all： Cancelallofont
found under EPON port 
mac：
The MAC address needed to cancel 
【Description】
Thiscommandisusedtocancelontunderfound automatically status 
【Example】