C-Data FD1216S - Ont Port Native-Vlan; Show Ont Info

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
97
use this command ,when you need to set up-policing.
ds-policing
traffic-table-index： The traffic-table-index of down-policing on the ETH port .you
can use this command ,when you need to set down-policing.
Unconcern： Unconcern the flow control of the ETH port
【Description】
Thiscommandisusedtocontroltheportstate,flowcontrol,trafficrate‐limitingoftheont.
【Example】
Closingthestateofontwithontid1andeth1onthePON13
OLT(config‐interface‐epon)#ontportattribute131eth1operational‐stateoff
Closingtheflow–controlofontwithontid1andeth1onthePON13
OLT(config‐interface‐epon)#ontportattribute131eth1operational‐stateoff

18.13ontportnative‐vlan
【Command】
ont port native-vlanportid ontidethont-portidvlan vlan-id
【View】 eponview
【Parameter】
port‐id： ThePONportnumberofONTthatneedtorestrat
ont‐id
： Thenumberoftheontthatneedtorestart
Ont‐portid:
the Ethernet port ofthe ONT 
Vlan‐id:thenative‐vlanidofport
【Desciption】

This command is used to control the pvid of the ONT port 
【Example】
SettheONTIDofpon13interfaceis1,ethis1,andpvidis10
OLT(config‐interface‐epon)#ontportnative‐vlan131eth1vlan10
18.14showontinfo
【Command】
showontinfoport‐id(ont‐id|all)
【View】 configview、eponview
【Parameter】
port‐id： ThePONportnumberoftheontthatneedtoquery
ont‐id
：  Thenymberofontthatneedtoquery
all：
you can use this command to query all of ONT relevant information under a port, the list displays the
current state of all ONT.

【Description】
This command is used to query the ont’s information (including the current