Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
14
【view】vlanifview
【parameter】
【description】
This command is used to configure the info of option60 when DHCP‐Client send the requst of
message .this command is used to configure the info of option60 in order to coordinate with
uplink that configured 3 layer relay of DHCP acording to
the option60.no command is used to
configuretheinf oofoption60,andrecoverthedefault.
【example】
Configuretheoption60infoofdhcp‐clientofthevlanif1“CDATA‐VLANIF”.
OLT(config‐interface‐vlanif‐1)#dhcp‐clientoption60CDATA‐VLANIF
Recoverthedefaultabouttheoption60infoofdhcp‐clientofthevlanif
OLT(config‐interface‐vlanif‐1)#nodhcp‐clientoption60
3.10showdhcp‐client
【command】
showdhcp‐client[interfacevlanifvlanif]
【view】configview
【parameter】
interfacevlanifvlanif:indexofthreelayerinterface
【description】
Thiscommandisusedtoqueryallofthesomeappointedinfoanddetailinfoafteropenningthe
functionoftheDHCPClient.
【example】
Checking
allofthebasedinfoofinterfaceopenedthedhcpclient.
OLT(config)#showdhcp‐client
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
IndexNameFSMIP/MASKLeasedUntilTime
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
1vlanif1BOUND192.168.2.46/242016‐04‐0520:36:42+0800
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Querythedetailinformationoftheipunderinterfacevlanif1,afterenablethefunctionofdhcp
client.
OLT(config)#showdhcp‐clientinterfacevlanif1
Interfacename:vlanif1
DHCP‐CLIENT:enable
CurrentFSMstate:BOUND
DHCPOPTION60:‐
Interface'shardwareaddress:E0:67:B3:00:00:04
DynamicIPaddress:192.168.2.46
Subnetmask:255.255.255.0
Leaseobtainedtime:2016‐04‐0519:36:42+0800
To Next Page
Loading...
General