C-Data FD1216S - Ont Modify; Ont Reboot

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
95
【View】 eponview
【Parameter】
port‐id：
The PON port number of the ONT needed to deactivate 
all：
Used to volume deactive ONT 
ont‐id
：  Usedtodeactive specified ONT on the PON port 
【Description】
This command is used to deactivate the ONT. ONT can work normally only in the activated state. Don't
need ONT normal work, you can use this command to deactivate ONT. By default, ONT is activated.

【Example】
Deactiveont1onthePON1
OLT(interface‐EPON)#ontdeactivate11

Deactivateall of activeted ONT on the PON1 
OLT(interface‐EPON)#ontdeactivate1all
NumberofONTsthatcanbedeactivated:1,success:1

18.9ontmodify
【Command】
ontmodifyport‐idont‐idont‐lineprofile‐idont‐lineprofile‐idont‐srvprofile‐idont‐srvprofile‐id
【View】 eponview
【Parameter】
port‐id： ThePONportnumberofONTthatneedtochangetemplate
ont‐id
： TheONTnumberthatneedtochangetemplate
ont‐lineprofile‐id
： Thenumberoflinetemplatethatneedtorebinding
ont‐srvprofile‐id
：  thenumberofbusinesstemplatethatneedtorebinding
【Description】
Thiscommandisusedto
change the ONT binding line template and business template. 
【Example】
Changethebindingbusinesstemplateoftheont1onthePON2
OLT(interface‐EPON)#ontmodify21ont‐srvprofile‐id200
18.10ontreboot
【Command】
ontrebootport‐id（all|ont‐id）
【View】 eponview
【Parameter】
port‐id： ThePONportnumberofONTthatneedtorestrat
all： RestratallofONUonthePONport
ont‐id
： ThenumberofONTthatneedtorestart
【Description】