C-Data FD1216S User Manual

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
56
reference for packet filtering rules. Or you can used with QoS policyfor a particular message
service quality assurance.
no rule : This command is used to delete or modify the ACL rules.
【Example】
In the worktime period, specified port 1 can only receive message from IP address for 10.10.10.2.
OLT(config)#time‐rangeworktime8:00to18:00working‐day
OLT(config)#acl2000
OLT(acl‐basic‐2000)#rule2permitsource10.10.10.20.0.0.0time‐rangeworking‐day
OLT(acl‐basic‐2000)#rule1denysourceanytime‐rangeworking‐day
OLT(acl‐basic‐2000)#exit
OLT(config)#packet‐filterinbound2000port
ge1
11.4rule(advacl)
【Command】
When protocol is TCP ,
the command format based on the IPv4 as follow
rule
rule-id (permit | deny) tcp [ [soure (ip-address sour-wildcard | any)] |
[destination(ip-address sour-wildcard | any)] | [src-port port-list | dest-portport-list] |
[precedence procedence-value ] | [dscp dscp-value] |[time-rangetime-range-name]]
When protocol is UDP ,
the command format based on the IPv4 as follow:
rule
rule-id (permit | deny) udp [ [soure (ip-address sour-wildcard | any)] |
[destination(ip-address sour-wildcard | any)] | [src-port port-list | dest-portport-list] |
[precedence procedence-value ] | [dscp dscp-value] |[time-rangetime-range-name]]
When protocol is IP,
the command format based on the IPv4 as follow:
rule
rule-id (permit | deny) ip [ [soure (ip-address sour-wildcard | any)] |
[destination(ip-address sour-wildcard | any)] | [src-port port-list | dest-portport-list] |
[precedence procedence-value ] | [dscp dscp-value] |[time-rangetime-range-name]]
When protocol is ipinip ,
the command format based on the IPv4 as follow :
rule
rule-id (permit | deny) ipinip [ [soure (ip-address sour-wildcard | any)] |
[destination(ip-address sour-wildcard | any)] | [src-port port-list | dest-portport-list] |
[precedence procedence-value ] | [dscp dscp-value] |[time-rangetime-range-name]]
When protocol is icmp ,
the command format based on the IPv4 as follow
rule
rule-id (permit | deny) icmp [ [soure (ip-address sour-wildcard | any)] |
[destination(ip-address sour-wildcard | any)] | | [ precedence procedence-value ] | [dscp
dscp-value ] |[time-rangetime-range-name]]
When protocol is other agreement except the TCP, UDP, ICMP, the command format based on the IPv4
as follow:
rule
rule-id (permit | deny) protocol [ [soure (ip-address sour-wildcard | any)] |

C-Data FD1216S Specifications

General

Brand	C-Data
Model	FD1216S
Category	Switch
Language	English