Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
27
7.5showportvlan
【Command】
showportvlanport‐id
【View】Viewge;viewEPON;Viewxge;Viewlink‐aggregation.
【Parameter】
port‐id
：
To‐be‐checkedPONportnumber.
【Description】
ThecommandisusetoqueryconfigurationinformationofportVLAN.
【Example】
queryconfigurationinf ormationofportVLAN:
OLT(interface‐ge)#showportvlan1
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Port:ge1Native‐Vlan:1Mode:Access
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Tagged‐Vlan:
‐
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Untagged‐Vlan:
1
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
7.6auto‐neg
【Command】
auto‐negport‐listswitch
【View】Viewge.
【parameter】
port‐list：To‐be‐checkedportlist.
switch：AutomaticNegotiationModeSwitch，Value：enable、disable。
【Description】
This command is used to enable or disable Ethernet auto‐negotiation mode. In enable case,
dockingportandtheEthernetport
automaticallynegotiationportspeedand duplexmode, and
the system displays from the consultations. In disable case, the port speed and mode of
operationofthevaluesetasthesystemdefaultvaluesorhuman(force).
【Example】
OLT(interface‐ge)#auto‐neg1enable
7.7duplex
To Next Page
Loading...