C-Data FD1216S User Manual

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
59
acl‐id:SpecificACL
all:ShowalloftheACL
【Desctribtion】
【Example】
QueringalloftheACLinformationaboutdevices
OLT(config)# show acl all
Basic ACL 2000, 1 rules hold
rule 1 permit source 10.10.10.2 0.0.0.0 time-range working-day
12.QOS
12.1packet‐filter
【Commond】
packet‐filter(inbound|outbound)acl‐id[rule‐idrule‐id]port（ge|EPON|xge）port‐list
nopacket‐filter(inbound|outbound)acl‐id[rule‐idrule‐id]port （ge|EPON|xge）port‐list
【View】
Configview
【Parameter】
Inbound:
Thetrafficoninboundpacketsoftheinterface
Outbound： the
traffic on outbound packets of the interface 
rule‐id
： theruleIDofACL
acl‐id:  ACL’sname
port‐list
：  portslist
【Describtion】
packet-filter: This commond is used to config ALC filter rules for special port,and make it
effect.you can use this commond , when you need to use the ACL rules to filter on port traffic.
no packet-filter: This commond is used to cancel the designated port of ACL filtering rules.
When you need to delete the specified port acls to filter rules, use this command.

【Example】
In the worktime period, specified port 1 can only receive message from IP address for 10.10.10.2
OLT(config)#time‐rangeworktime8:00to18:00working‐day
OLT(config)#acl2000
OLT(acl‐basic‐2000)#rule2permitsource10.10.10.20.0.0.0time‐rangeworking‐day
OLT(acl‐basic‐2000)#rule1denysourceanytime‐rangeworking‐day
OLT(acl‐basic‐2000)#
exit
OLT(config)#packet‐filterinbound2000portge1

12.2 traffic‐dscp 

C-Data FD1216S Specifications

General

Brand	C-Data
Model	FD1216S
Category	Switch
Language	English