C-Data FD1216S - Terminal Debugging; Show Terminal Debugging

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
106
filename ：  thefilenameofsavedlog
【Description】
ThiscommandisusedtomanuallysavelogtotheFTPserver
【Example】
Savelogtoftpserver,theipaddressofftpserveris192.168.1.223,usernameisadmin,passwordis
admin.
OLT(config)#backuplogftp192.168.1.223adminadminlogback
Startbackuplogfiles
Thebackupissuccessful



19.9terminaldebugging
【Command】
terminaldebugging
noterminaldebugging
【View】 configview
【Parameter】
【Description】
Thiscommandisusedtoenabledebugoutputtothecurrentterminalline,whentheuserneed
monitor debugging information,you can use this command. After this command is executed successfully,
debugging information can be output in terminal command line interface.

【Example】
Enbledebugoutputtothecurrentterminalline
OLT(config)#terminaldebugging
Currentterminaldebuggingison

19.10showterminaldebugging
【Command】
showterminaldebugging
【View】 configview
【Parameter】
【Description】
showterminaldebugging
this command is used to view weather enable terminaloutputdebugging
【Example】
view weather enable terminaloutputdebugging
OLT(config)#showterminaldebugging
CurrentterminaldebuggingisON.