C-Data FD1216S - Show Qos-Info

Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
65
Configview
【Parameter】
Inbound:thetrafficoninboundpacketsoftheinterface
Outbound：thetrafficonoutboundpacketsoftheinterface
rule‐id： theruleIDofACL
acl‐id:ACL’sname
port‐list：portslist
【Description】
traffic‐statisticclear-counters: This command is used to remove the configuration which
istraffic statistics of the specified port ,and make it take effect.
【Example】
In the worktime period,removing the flow statistics of message that is from port 1 ,and the ip
address of the message is 10.10.10.2.
OLT(config)#time‐range
worktime8:00to18:00working‐day
OLT(config)#acl2000
OLT(acl‐basic‐2000)#rule2permitsource10.10.10.20.0.0.0time‐rangeworking‐day
OLT(acl‐basic‐2000)#exit
OLT(config)#traffic‐statisticclear‐countersinbound2000portge1
12.10 showqos‐info
【Command】
show qos‐info( [traffic‐dscp]|[traffic‐dscp]|[traffic‐limit]|[traffic‐mirror]|
[traffic‐outervlan]|[traffic‐priority]|[traffic‐redirect ]|[traffic‐statistic]|[all] )
port（ge|xge）port‐list
【View】
Configview
【Parameter】
port‐list
：  portslist
【Description】
show qos‐info( [traffic‐dscp]|[traffic‐dscp]|[traffic‐limit]|[traffic‐mirror]|
[traffic‐outervlan]|[traffic‐priority]|[traffic‐redirect ]|[traffic‐statistic]|[all] )
port（ge|xge）port‐list 
thiscommandisusedtoviewtheQOSpolicies
oftheequipmentport
【Example】
In the worktime period, View all the QOS strategy from port 1.
OLT(config)# show qos-info all port ge 1 t
raffic-limit on ge1:
Inbound:
Matches: acl 2000 rule 1 running
Target rate: cir 64(kpbs) pir 9984(kbps)
Exceed: Drop