Calrec Artemis - Page 4

4 ARTEMIS Digital Broadcast Production Console
Patching at different sample rates 50
Bulk patching and source views 50
Protection against removing multiple
destinations 50
Mic Open field 50
Additional port info - Desc & Diag 50
Over-patching, removing & moving 51
Offline patching 51
Sources used in multiple locations 51
Returning outputs to input channels 51
Hydra2 Patchbays 51
HPB’s at different sample rates 51
Alias patching 51
Patching inputs directly to outputs 51
Patching Shortcuts 52
Custom fader labels 53
Ability to Receive External Source Labels via
SW-P-08 53
Source Label Hierarchy 53
Input Controls 54
Inputs 1 and 2 54
Mic/Line gain 54
±6dB coarse gain 54
Input trim 55
Tone 55
Linking Input Trims 55
Input delay 55
48v 56
Polarity inversion 56
Input balance 56
L>B and R>B 56
M-S 56
SRC 56
Signal flow 56
Replay 57
Adding Paths to the Replay Set 57
Activating Replay 57
Input Port Protection 58
Controlling a Protected Input Port 58
Loading Shows/Memory/Alias Files 58
Dolby E Decoding 60
Passing signals through decoders 60
Important - sample rate conversion 61
Important - synchronisation 61
Metadata 61
Passing encoded Dolby E 61
Alias Files 62
Editing alias files 62
Aliases at different sample rates 62
Alias groups 63
Alias mic bus 63
Enabling an alias file 63
Alias patching 63
Tone / Oscillator Controls 64
Oscillator Parameters 64
Tone Idents 65
External Tone 65
Tone Clear 65
Tone Patchable to Output Ports 66
Tone Troubleshooting & FAQs 66
Hydra2 Patchbays 67
HPBs and different sample rates 67
Port Sharing 68
Unpatching 68
Processing Audio 69
Channel Signal Flow 70
EQ and Filters 71
A & B alternate EQ Settings 71
EQ curve display 72
Dynamics 1 73
Dynamics 1 controls 73
Processing order 74
Dynamics metering 74
Side-chain EQ 74
About Dynamics Side-chain & EQ 74
Dynamics Links 74
Dynamics 2 76
Dynamics 2 controls 76
Automixer 77
Assigning control 77
Gain reduction metering 77
Delay 79
Assignable Delay at different sample rates. 79
Individual Assignable Delay 79
Individual Path Delay 79
Delay Settings 80
Assigning Delay to a Faderless Path 80
Global Delay Settings 80
Stereo Width 81
Stereo/Surround Spill 82
Accessing the spill faders 82
Assigning paths on the spill panel 82
Changing the user section 82
Processing Independence 83
Independence status indicators 83
EQ independence 83
Dynamics independence 83
Inserts 84
Patching insert resources to ports 84
Inserts at different sample rates 84
Connecting insert resources to paths 85
Naming insert resources 85
Insert resource lists 85
Creating lists 85
Copying/moving insert resources to lists 86
Removing insert resources from lists 86
Renaming lists 86
Removing lists 86
Insert Order and Sets 86
Insert ON / OFF Control 86
VCA Groups 87
Creating and dissolving VCA groups 87
Group hierarchy 87
Fader status indicators 87
VCA group interrogation 88
Masters & slaves on the same fader 88
Fader level indicator 88
Nulling indicators 88
Preserving balance of slaves at low levels 88
5.1 Surround channels 88
VCA group protection 88
VCA Slaves move with VCA Masters 88
VCA operation with Remote Production units
88
Autofaders 89
Setting Up Autofaders for use 90
Assigning GPI’s to autofaders 90
Assigning autofaders to faders 90
Autofader levels 91
Autofader parameter settings 91
Global Autofader Bypass 91
Autofader indicators 91
Default Fader Interaction Mode 92
Routing Audio 93
Buses Overview 94
Setting Bus widths 94
Admin protection for Bus widths 94
Buses at different sample rates 94
LtRt / LoRo downmixes 95