53
Fader in desk and Large Soft Panel
landscape on desk stand, fixed 50
deg. viewing angle.
MU6411 and IM6413 Mounting
options using:-
720-999001 LSP on desk mounting
720-999006 Fader in desk
mounting brackets.
Assembly -
Tools required (not supplied)
7mm adjustable/spanner/wrench open
ended.
PZ2 screw driver/ bit.
Wood screws.
Saw.
Follow instructions for 720-999006
Fader in desk mounting kit but .
Fader opening size will require extending
to 418mm (16.45in) x 247mm (9.7in)
Offer up fader panel through opening
from underside.
Fix brackets (720-999006 item2) to
underside of desk with 4 screws (not
supplied) suitable for desk surface.
Push up Fader Panel from underside
until Fader panel is flush with surface
and tighten 4 x M4 nuts (720-999006
Item 4).
Do not over tighten. Typically 1N/m
Follow instructions for 720-999001
LSP on desk stand but do not fit rubber
feet to stand, VESA fixing holes as per
720-999001 Fig 2a.
FIG 6 FADER IN DESK AND LSP ON DESK STAND
FIG 7 MOUNTING OPTION FOR DESK THICKNESS 15MM-25MM
15mm-25mm
Front
247mm
418mm-430mm
To Next Page
Loading...
