EasyManuals Logo

CAME FERNI User Manual

CAME FERNI
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1
SAFETY
SAFETY SYMBOL AND SIGNAL WORD
REVIEW
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of serious injury or death if you do not comply with
the warnings that accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the
possibility of damage to your gate and/or the gate operator if you do not comply
with the cautionary statements that accompany it. Read them carefully.
IMPORTANT NOTE
BEFORE attempting to install, operate or maintain the operator, you must read
and fully understand this manual and follow all safety instructions.
DO NOT attempt repair or service of your gate operator unless you are an
Authorized Service Technician.
MECHANICAL
ELECTRICAL
SAFETY SYMBOL AND SIGNAL WORD REVIEW
TABLE OF CONTENTS
SAFETY 1
SAFETY SYMBOL AND SIGNAL WORD REVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . 1
UL325 MODEL CLASSIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTALLATION INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
GATE CONSTRUCTION INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
REQUIRED ENTRAPMENT PROTECTION DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . 5
IMPORTANT SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
INTRODUCTION 7
OPERATOR SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CARTON INVENTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OPERATOR AND CONTROL PANEL DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . 8
PREPARATION 9
TOOLS AND MATERIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
WIRING CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SITE PREPARATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
INSTALLATION 10
INSTALL THE CONDUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
INSTALL THE PILLAR AND GATE BRACKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
INSTALL THE OPERATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ASSEMBLE THE TRANSMISSION AND DRIVE ARMS . . . . . . . . . . . . . . . . . . . . . . 12
INSTALL THE LIMIT SWITCHES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ATTACH THE COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
MOUNT THE CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
WIRING 16
OVERVIEW OF CONTROL PANEL AND ELECTRONIC CARD . . . . . . . . . . . . . . . . . 16
WIRE THE OPERATOR(S) TO THE
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
WIRE THE ENTRAPMENT PROTECTION DEVICES . . . . . . . . . . . . . . . . . . . . . . . . 18
WIRE THE ENTRAPMENT PROTECTION DEVICES . . . . . . . . . . . . . . . . . . . . . . . . 19
OPTIONAL WIRING 20
ACCESSORY POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
COMMAND AND CONTROL DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
WARNING DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
USING THE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
FACTORY SETTINGS (DEFAULTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PROGRAMMING 22
BASIC SETUP FOR TYPICAL APPLICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
INSTALL AND PROGRAM THE
SECURITY+ 2.0™ RADIO CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
MENU DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
ADJUSTMENTS 27
MANUAL RELEASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
TEST PHOTOELECTRIC SENSORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MAINTENANCE 28
MAINTENANCE CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ADDITIONAL SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
TROUBLESHOOTING 30
DISPOSAL 30
DISPOSAL OF PACKING MATERIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
DISPOSAL OF PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
REPAIR PARTS 31
WARRANTY 32

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CAME FERNI and is the answer not in the manual?

CAME FERNI Specifications

General IconGeneral
Max Gate Weight800 kg
Power Supply230 V AC
Motor Power300 W
Operating Temperature-20°C to +55°C
Protection RatingIP54
Duty Cycle30%
Maximum Leaf Weight800 kg
Safety FeaturesObstacle detection

Related product manuals