Replacing the Date/Time Battery
The date/time (back-up) battery maintains the camera's date and time
and its service life
is
about 5 years. If the date/time
is
reset when the
battery
is
replaced, replace the back-up battery with a new CR2016
lithium battery
as
described below.
The date/time setting will also be reset, so you must set the
correct date/time.
Turn the
<~>
switch to
<OFF>.
(-)
(+)
Remove the battery.
Take out the battery holder.
Replace the battery.
Make sure the battery
is
in
the proper
+ - orientation.
Insert the battery holder.
Then load the battery and close the
cover.
--
For the date/time battery, be sure to use a CR2016 lithium battery.
40
To Next Page
Loading...
