White Balance Correction *
You
can correct the standard color temperature for the white balance
setting. This adjustment will have the same effect as using a color
temperature conversion or color compensating filter. Each color can be
corrected to one
of
nine levels. Users familiar with using color temperature
conversion or color compensating filters will find this feature handy.
Sample
setting:
A2,
G1
Select [WB SHIFT/BKT].
Turn the
<0>
dial to select
[0
WB
SHIFT/BKT],
then press <8>.
The WB correction/WB bracketing
screen will appear.
White Balance Correction
Use <
~f:
> to move the
~,
• " to the
desired position on the screen.
B is blue, A is amber, M is magenta,
and G is green. The color
in
the
respective direction will be corrected.
The upper right
of
the "SHIFT" screen
will show the bias direction and
correction amount.
To
cancel the white balance correction,
use <
~f:
> to move
the"
• " to the
center so that the "SHIFT"
is
"0,
0".
Press < 8 > to exit the setting and
return to the menu.
[J]
During the white balance correction,
<~~>
will be displayed
in
the
viewfinder and on the LCD panel.
i$;
One level
of
the blue/amber correction is equivalent to 5 mireds
of
a color
temperature conversion filter. (Mired: A measurement unit indicating the
density
of
a color temperature conversion filter.)
You can also set white balance bracketing and AEB shooting
in
combination with white balance correction.
If you turn the <
0 >
dial
in
step
2,
WB bracketing will be set. (p.68)
67
To Next Page
Loading...
