IMliiJrrrZUtt
IlmI!I
File Numbering Methods
ijimM.
amp',,,,,"
Auto
Reset
When the CF card is replaced with a newly-formatted CF card, the
folder numbering and file numbering will restart from the beginning
(1
00~0001).
It will start from folder number 100 and file number 0001.
This
is
convenient when you want to organize images according to CF
cards. Ifthe replacement CF card contains images recorded previously,
the file numbering will follow the highest file number (in the highest
numbered folder) in that CF card.
I
File
numbering
after
changing the CF card
File number
is
reset
Manual Reset
This creates a new folder automatically numbered with the next higher
number, and the file number restarts from 0001. Images captured
thereafter are saved
in
this new folder.
The file numbering method (Auto reset or Continuous) that was
in
effect
before the manual reset will continue to take effect.
..
If folder No. 999 is created, [Folder
number
full] will appear on the LCD
monitor. Then
if
file No. 9999 is created, "Err CF" will be displayed on the
LCD panel and
in
the viewfinder. Replace the CF card with a new one.
[iI
rJli;
Ifthe folder contains file number 9999, a new folder will be created
automatically when the next image is captured. The image will then be
saved in the new folder as file number 0001.
$lI
For both JPEG and RAW images, the file name will start with "IMG_".
The extension will be ".JPG" for JPEG images and ".CR2" for RAW
images.
71
To Next Page
Loading...
