Canon EOS 77D - Page 57

57
Basic Shooting Operations
With [54: Multi function lock] set and the <R> switch set
upward, you can prevent the settings from being changed by
accidentally operating Main Dial or Quick Control Dial or by
inadvertently tapping on the touch screen.
<R> switch set downward:
Lock released
<R> switch set upward:
Lock engaged
1
Select [Multi function lock].
 Under the [54] tab, select [Multi
function lock], then press <0>.
2
Add a checkmark [X] to the
camera control to be locked.
 Select a camera control and press
<0> to add a checkmark [X].
 Select [OK].
 The selected camera controls will be
locked when the multi function lock
switch is set in the locked position.
R Multi Function Lock
 If the <R> switch is set upward and you try to use one of the locked
camera controls, <L> will be displayed in the viewfinder and on the LCD
panel. On the Quick Control screen (p.58), [LOCK] will be displayed.
During Live View shooting, [LOCK] will be displayed on the LCD monitor.
 By default, the <5> dial will be locked when the multi function lock
switch is in the locked position.
 In Basic Zone modes, only [hTouch control] is settable.