271
General Still Photo Shooting Cautions
o
With the HDMI Cable HTC-100 (sold separately), you can display the image
on a television (
=
344). Note that no sound will be output.
Information Display in Live View Shooting
For details on the icons displayed for still photo shooting, see
=
623.
o
When [
g
] is displayed in white, it indicates that the image is displayed at
the brightness level closely matching that of the actual image to be captured.
o
If [
g
] is blinking, it indicates that the image is displayed at a brightness that
diff ers from the actual shooting result because of low- or bright-light conditions.
However, the actual image recorded will refl ect the exposure setting. Note that
the noise may be more noticeable than the actual image recorded
.
o
Exposure simulation may not be performed under some shooting settings.
The [
g
] icon and histogram will be displayed in gray
. The image will be
displayed on the screen at the standard brightness. The histogr
am may not be
properly displayed in low- or bright-light conditions.
o
The histogram can be displayed when [
z
: Expo. simulation] is set to
[Enable] (
=
221).
To Next Page
Loading...
