59
Basic Operations
5
Quick Control Dial
(1) After pressing a button, turn the
<
5
> dial.
When you press a button such as <AF>,
<
i
>, or <
q
>, the respective function
remains selectable for approx. 6 sec. (
9
).
During this time, you can turn the <
5
> dial
to change the setting.
When the timer ends or if you press the
shutter button halfway, the camera will go
back to shooting-ready state.
Use this dial to select the AF operation,
ISO speed, metering mode,
AF point,
etc.
(2) Turn only the <
5
> dial.
While looking at the viewfi nder display or
LCD panel, turn the <
5
> dial.
Use this dial to set the exposure
compensation amount, the aperture
setting for manual exposures, etc.
o
The operations in (1) can be performed even when the <
R
> switch is set
upward (Multi-function lock,
=
60).
To Next Page
Loading...
