3
Enter the value in [Y] in the same way as [X].
4
Select [<Apply>], and press .
If a Set Paper Size Is Not Displayed
Pr
ess [<Other Sizes>], press
, and select the paper size from the displayed list.
4
Select the type of the paper loaded in the paper drawer, and press
.
If you frequently need to change the paper to be loaded, set to [Free]; this will reduce the number of steps
r
equired to change the setting each time. However, note that this setting lets the machine perform printing
even if there is mismatch between the paper type setting in the printer driver and the paper type actually
loaded in the machine.
When the paper type setting in the printer driver is [Auto], the machine operates the same way as when the
paper type is [Plain 1].
➠ The paper size and type are set.
● Y
ou can change the paper size displayed on the screen in Step 3.
Hiding Unused Paper Sizes(P. 99)
Basic Operations
96
To Next Page
Loading...
