Canon imageCLASS LBP121dn - Connecting to a Wireless LAN by Setting the Details (Manual Setup Method)

Connecting to a Wireless LAN by Setting the Details
(Manual Setup Method)
95LW-015
Y
ou can connect to a wireless LAN router by manually entering all information of the router such as the SSID, network
key, and security settings.
Administrator privileges are required to connect to a wireless LAN.
Required Preparations
● Pr
epare the information of the wireless LAN router to which you want to connect, and keep it close by.
Wireless LAN Router Information Required for Connection(P. 39)
● When connecting to a wir
eless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, set
IEEE 802.1X.
Using IEEE 802.1X(P. 155)
1
On the operation panel, select [Menu] in the [Home] screenand press . [Home]
Screen(P. 81)
2
Press [Preferences [Network] [Wireless LAN Settings] .
➠ The [Select Network] scr
een is displayed.
● If the login screen appears, enter the System Manager ID and PIN, and then press
. System Manager
ID and PIN(P
. 4)
● If the message [Enable the wireless LAN?] appears, select [Yes] and press
.
● If the message [Cannot nd the access point.] appears, select [Close] and pr
ess
.
3
Select [Other Connections] and press .
4
Select [Manually Enter Network Name] and press
.
➠ The SSID input scr
een is displayed.
5
Enter the SSID, select [<Apply>], and press
.
➠ The [Security Settings] scr
een is displayed.
6
Select the security standard, and set the authentication and encryption.
When using WEP
1
Select [WEP] and press
.
➠ The [802.11 Authentication] scr
een is displayed.
Setting Up
47