The Printed Barcode Cannot be Scanned
95LW-075
T
roubleshoot by checking in the following order:
Are You Using a Very Small Barcode or One With Thick Lines?
● Enlar
ge the barcode.
● If the barcode lines are perpendicular to the output feed direction, rotate the image 90° so that the lines are
parallel.
Try using Barcode Adjustment Mode
Setting [Barcode Adjustment Mode] to [Mode 1] in the printer driver may solve the problem. If that does not
work, try selecting [Mode 2] and then [Mode 3] in sequence.
● Specify the settings belo
w in the [Printing preferences] screen of the printer driver.
[Finishing] tab [Advanced Settings] [Barcode Adjustment Mode] select the mode
* When this setting is enabled, the print density may decrease.
● If setting [Bar
code Adjustment Mode] to [Mode 3] does not work, changing the [Printer Density] may solve
the problem.
[Printer Density](P. 220)
Troubleshooting
297
To Next Page
Loading...
