Canon imageCLASS LBP121dn - Connecting to a Wireless LAN by Entering a PIN Code (WPS PIN Code Mode)

Connecting to a Wireless LAN by Entering a PIN Code
(WPS PIN Code Mode)
95LW-013
When the wir
eless LAN router supports WPS PIN code mode, you can establish a connection by registering a PIN code
generated on the machine to the wireless LAN router. Use a computer to register the PIN code.
Administrator privileges are required to connect to a wireless LAN.
Required Preparations
● Access the wir
eless LAN router from a computer, and enable registration of a WPS PIN code.
* For details on how to register a WPS PIN code, see the manual of your wireless LAN router.
1
On the operation panel, select [Menu] in the [Home] screen and press . [Home]
Screen(P. 81)
2
Press [Preferences [Network] [Wireless LAN Settings] .
➠ The [Select Network] scr
een is displayed.
● If the login screen appears, enter the System Manager ID and PIN, and then press
. System Manager
ID and PIN(P. 4)
● If the message [Enable the wireless LAN?] appears, select [Yes] and press .
● If the message [Cannot nd the access point.] appears, press .
3
Select [Other Connections] and press .
4
Select [WPS PIN Code Mode] and press
.
➠ A PIN code is gener
ated.
Once this screen is displayed, you must register the WPS PIN code to the wireless LAN router within 10
minutes.
5
Access the wireless LAN router from a computer, and register the WPS PIN code to
the r
outer.
6
When [Connected.] appears on the operation panel, press .
➠ When the machine is connected to the wir
eless LAN, [
] appears on the [Home] screen.
Setting Up
43