Cleaning the Drum
95LW-065
If the printout is smudged, the drum may be dirty
. Clean the drum using the procedure below.
The drum cannot be cleaned when data is waiting to be printed
1
On the operation panel, select [Menu] in the [Home] screen, and press
. [Home]
Scr
een(P. 81)
2
Press [Adjustment/Maintenance]
[Maintenance] [Clean Drum] .
➠ The [Clean Drum] screen is displayed.
3
Select [Start], and press .
➠ Cleaning is performed.
When cleaning is completed, the message [Finished.] appears, and then the [Maintenance] scr
een is
displayed.
Maintenance
255
To Next Page
Loading...
