Canon imageCLASS LBP121dn - Configuring WINS

Conguring WINS
95LW-01E
When using the machine in a network envir
onment that uses both NetBIOS and TCP/IP, congure Windows Internet
Name Service (WINS) to convert the NetBIOS name to an IP address.
To enable WINS, specify the WINS server. WINS cannot be used in an IPv6 environment.
This section describes how to congure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to congure the settings.
[WINS Settings](P. 213)
Administr
ator privileges are required. The machine must be restarted to apply the settings.
Required Preparations
● Set the computer name and workgr
oup name.
Setting the Computer Name and Workgroup
Name(P
. 59)
● Prepare the IPv4 address of the WINS server and keep it close by.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 179)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P
. 181)
3
Click [Network Settings]
[WINS Settings] [Edit].
➠ The [Edit WINS Settings] scr
een is displayed.
4
Select the [WINS Resolution] checkbox.
5
Enter the IPv4 address of the WINS server, and click [OK].
If the IP address of the WINS server is obtained from a DHCP server, the obtained IP address has priority.
Conguring DNS(P
. 56)
6
Restart the machine.
Restarting the Machine(P. 75)
➠ The settings are applied.
Setting Up
60