Canon imageCLASS LBP121dn - Selecting Wired or Wireless LAN

Selecting Wired or Wireless LAN
95LW-00Y
Set whether to connect the machine to the network using a wir
ed or wireless LAN.
If you want to switch from wired LAN to wireless LAN, you can make the setting during the procedure for connecting
to wireless LAN.
Connecting to a Wireless LAN(P. 38)
* Y
ou cannot connect to a wired LAN and wireless LAN at the same time.
Use the operation panel to congure the settings. You cannot congure the settings using Remote UI from a
computer.
Administrator privileges are required.
1
On the operation panel, select [Menu] in the [Home] screen and press
. [Home]
Scr
een(P. 81)
2
Press [Preferences]
[Network] [Select Wired/Wireless LAN] .
If the login screen appears, enter the System Manager ID and PIN, and then press . System Manager
ID and PIN(P
. 4)
3
Select [Wired LAN] or [Wireless LAN] and press
.
➠ The message [Settings applied.] appears.
Ne
xt, connect to the wired or wireless LAN.
Connecting to a Wired LAN(P. 37)
Connecting to a Wireless LAN(P. 38)
When Switching between Wired and Wireless LAN
● Any installed drivers must be uninstalled and then r
einstalled.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
Setting Up
36