Smudge Marks Appear on the Edge of Printouts
95LW-06U
T
roubleshoot by checking in the following order:
Are You Using Appropriate Paper?
● Check whether the paper in the machine is usable, and r
eplace it with appropriate paper, as needed.
Usable Paper(P. 13)
Loading Paper(P. 87)
Ar
e You Printing to the Edge of the Paper Without Margins?
This symptom may occur when the margin is set to none in the printer driver. To print with this machine, a
mar
gin of 5 mm (15 mm at the top and bottom and 10 mm on the left and right sides) is required.
On the [Printing preferences] screen of the printer driver, congure the following setting to provide a margin.
[Finishing] tab [Advanced Settings] [Expand Print Region and Print] [Off]
Have You Cleaned the Fixing Assembly?
These symptoms may occur when the xing assembly is dirty
. In this case, clean the xing assembly.
Cleaning the Fixing Assembly(P. 254)
Troubleshooting
285
To Next Page
Loading...
