Preparations and Orientation for Loading Envelopes
95LW-028
As envelopes have a differ
ent shape and thickness from regular paper, preparations must be made before loading
envelopes.
Envelopes can be printed only on the front side (non-glued side). When loading envelopes, pay attention to the
orientation and which side is face up.
Preparations before Loading Envelopes(P. 90)
Orientation of Envelopes(P. 91)
● For the gener
al procedure of loading envelopes, see the following:
Loading Paper in the Paper Drawer(P. 88)
Preparations before Loading Envelopes
Align the envelopes r
egardless of the number of envelopes to be loaded.
1
Close the ap of each envelope.
2
Flatten them to remove any air, and make sure the edges are pressed tightly.
3
Loosen any stiff corners of the envelopes, and atten any curls.
4
Align the edges of the envelopes on a at surface.
Basic Operations
90
To Next Page
Loading...
