Canon imageCLASS LBP121dn - Configuring a Printer Port (Windows)

Conguring a Printer Port (Windo
ws)
95LW-02L
If the IP addr
ess of the machine changed or a printer has been added in Windows, you may not be able to print from a
computer. In this case, use the printer driver to add a new port.
In addition, you cannot print from a computer when the port number of the printer driver differs from that of the
machine setting. In this case, change the setting on the printer driver to match that of the machine.
Adding a Port(P. 104)
Changing the Port Type and Number(P. 105)
Adding a Port
Administrator privileges are required on each computer.
Required Preparations
● Pr
epare the information of the IP address or DNS name (host name) of the machine and keep it close by.
Checking the Network Status and Settings(P. 66)
1
Log on to the computer using an administrator account.
2
Click [
] (Start) [ ] (Settings) [Devices] [Printers & scanners].
➠ The [Printers & scanners] scr
een is displayed.
3
Click the printer driver of the machine
[Manage] [Printer properties].
➠ The printer driver pr
operties screen is displayed.
4
On the [Ports] tab, click [Add Port].
➠ The [Printer Ports] scr
een is displayed.
5
Add a new port.
1
Select [Standard TCP/IP Port], and click [New Port].
➠ The [Add Standar
d TCP/IP Printer Port Wizard] screen is displayed.
2
Click [Next].
3
Enter the IP address or DNS name (host name), and then click [Next].
Printing
104