Canon imageCLASS LBP121dn - Setting the Department ID and PIN for the Administrator

Setting the Department ID and PIN for the
Administr
ator
95LW-03J
Set the System Manager ID and System Manager PIN to cr
eate an administrator account.
By creating an administrator account, only those users who know these credentials can log in to System Manager
Mode to view and change important settings.
System Manager ID and PIN(P. 4)
This section describes ho
w to congure the settings using the operation panel.
You can also congure the settings using Remote UI from a computer after the System Manager ID and PIN have been
set on the machine.
Managing the Machine from a Computer (Remote UI)(P. 178)
Administr
ator privileges are required.
1
On the operation panel, select [Menu] in the [Home] screen, and press
. [Home]
Scr
een(P. 81)
2
Press [Management Settings]
[User Management] [System Manager
Information Settings] .
➠ The [Sys. Manager Info Set.] scr
een is displayed.
If the login screen appears, enter the currently set System Manager ID and PIN, and then press
.
3
Press [System Manager ID and PIN] enter the System Manager ID .
Specify any number. You cannot set a System Manager ID consisting of all zeros, such as "00" or "0000000."
4
Enter the System Manager PIN, and press .
Specify any number other than "7654321." You cannot set a PIN consisting of all zeros, such as "00" or
"0000000."
5
Enter the PIN again, and press .
➠ The settings ar
e applied.
● Do not forget the System Manager ID and PIN. If you forget your System Manager ID and PIN, contact your
dealer or service representative. If the Problem Persists(P. 339)
Setting the System Manager Information
● On the [Sys. Manager Info Set.] scr
een, press [System Manager Name] to set the name of the system
manager.
● You can also congure the e-mail address and other system manager information by using Remote UI from
a computer.
Security
144