Canon imageCLASS LBP121dn - Managing the Machine

Use the operation panel to congur
e the settings. You cannot congure the settings using Remote UI from a
computer.
Administrator privileges are required. The machine must be restarted to apply the settings.
1
On the operation panel, select [Menu] in the [Home] screen, and press
. [Home]
Scr
een(P. 81)
2
Press [Management Settings]
[Remote UI Settings/Update Firmware]
[Remote UI Settings] .
➠ The [Remote UI Settings] scr
een is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press
. System Manager
ID and PIN(P
. 4)
3
Press [Use Remote UI]
[Off] .
4
Restart the machine. Restarting the Machine(P. 75)
➠ The settings ar
e applied.
Security
169