Canon imageCLASS LBP121dn - Page 200

When the Settings Menu Is Initialized
When any of the follo
wing is initialized, restart the machine to apply the initialized settings.
Restarting the
Machine
(P. 75)
● [Preferences]
● [Function Settings]
● [Management Settings]
● [Network Settings]
When Initializing a Key and Certicate
● Functions using a k
ey and certicate such as TLS are disabled. To use these functions again, you must set the
key and certicate, and then enable the function.
When [Management Settings] of the Settings Menu Is Initialized
● This also initializes the Remote UI Access PIN. To use Remote UI, you must set the Remote UI Access PIN
again.
Setting the PIN to Use for Remote UI(P. 168)
Initializing All Settings and Data
Use the oper
ation panel to initialize all settings and data. You cannot initialize these using Remote UI from a computer.
Administrator privileges are required. When these are initialized, the machine restarts automatically.
● Befor
e initialization, check that there is no data being processed or waiting to be processed. This data is
deleted when the initialization is performed.
1
On the operation panel, select [Menu] in the [Home] screen, and press
. [Home]
Scr
een(P. 81)
2
Press [Management Settings]
[Initialize All Data/Settings] .
➠ The initialization conrmation scr
een is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press
. System Manager
ID and PIN(P
. 4)
3
Press
[Yes] .
➠ All settings and data ar
e initialized.
When initialization is complete, the machine restarts automatically.
Managing the Machine
193