Canon imageCLASS LBP121dn - Page 209

* Depending on your country or region, the [Date Format] setting may not be available, or its content or default
setting may be differ
ent.
[YYYY MM/DD]
[MM/DD/YYYY]
[DD/MM YYYY]
[Time Format]
[Menu] [Preferences] [Timer/Energy Settings]
Set 12 Hour or 24 Hour as the format for displayed time.
[12 Hour (AM/PM)]
[24 Hour]
[Auto Reset Time]
[Menu] [Preferences] [Timer/Energy Settings]
If the oper
ation panel is not used for a set period, a function called "Auto Reset Time" automatically restores the
default settings. This setting species whether Auto Reset is invoked.
If you enable Auto Reset, you can then set the time after which it is triggered.
0 (Off)
1 to 2 to 9 (min.)
Situations Where Auto Reset is Not Triggered
● When the Err
or lamp on the operation panel is ashing
Operation Panel(P. 10)
● When the [Menu] scr
een or an error message
*1
is displayed on the operation panel
● When processing of some sort (such as printing) is in progress
*1
Auto Reset is performed for some messages.
[Auto Sleep Time]
[Menu] [Preferences] [Timer/Energy Settings]
Set the time after which the machine automatically goes into sleep mode. Reducing Power Consumption (Sleep
Mode)(P
. 76)
* Use of the default settings is recommended to achieve the most effective power savings.
1 to 60 (min.)
Settings Menu Items
202