Canon imageCLASS LBP121dn - Page 213

[MAC Address]
[IEEE 802.1X Settings]
[Menu] [Preferences] [Network]
Specify whether to use IEEE 802.1X.
Use Remote UI fr
om a computer to set the IEEE 802.1X authentication method.
Using IEEE 802.1X(P. 155)
* [IEEE 802.1X Settings] may not be displayed depending on the model, the installed options, and other settings.
[Off]
[On]
[Firewall Settings]
[Menu] [Preferences] [Network]
Specify whether to enable an IP addr
ess lter and MAC address lter.
Use Remote UI from a computer to set the default policy for ltering and the exception addresses.
Setting the
Fir
ewall(P. 147)
[IPv4 Address Filter]
[Outbound Filter]
[Off]
[On]
[Inbound Filter]
[Off]
[On]
[IPv6 Addr
ess Filter]
[Outbound Filter]
[Off]
[On]
[Inbound Filter]
[Off]
[On]
[MAC Address Filter]
[Outbound Filter]
[Off]
[On]
[Inbound Filter]
[Off]
[On]
[RMT-SW]
[Menu] [Preferences] [Network]
Normally
, use the machine with this set to [Off].
When your service representative carries out device maintenance remotely, he or she may change this to [On].
Settings Menu Items
206