Canon imageCLASS LBP121dn - Page 39

2
On the [Current Time Set.] screen, enter the date and time, and press
.
➠ The time and date ar
e set, and the Remote UI conrmation screen is displayed.
Step 3: Setting Remote UI
With Remote UI, you can use a W
eb browser on a computer to check the operation status of the machine, change the
settings, and perform other operations.
Set the Remote UI Access PIN for using Remote UI to prevent unauthorized access to the machine.
1
On the Remote UI conrmation scr
een, select [<Yes>] and press .
To set the Remote UI Access PIN at a later time, select [No] and proceed to "Step 4: Connecting to a Wireless
LAN." Setting the PIN to Use for Remote UI(P. 168)
2
Conrm the message press conrm the message select [Yes] press .
➠ The [Remote UI Access PIN] scr
een is displayed.
Restrict the use of Remote UI to only those users who know the Remote UI Access PIN.
3
Enter the Remote UI Access PIN
select [<Apply>] press .
Specify any number. You cannot set a PIN consisting of all zeros, such as "00" or "0000000."
4
Enter the PIN again
select [<Apply>] press .
➠ After the message [Settings applied.] appears, the scr
een for conrming the wireless LAN connection is
displayed.
Step 4: Connecting to a Wireless LAN
Connect to the network using wir
eless local area network (LAN).
1
On the screen for conrming the wir
eless LAN connection, select [Yes] and press
.
● If the machine is not connected to a wireless LAN, select [No] and press . The settings congured in the
Setup Guide are applied.
● When connecting to a wired LAN, congure the wired LAN connection settings after exiting the Setup Guide.
Selecting Wired or Wireless LAN(P. 36)
2
Select the Wireless LAN connection type, and connect to the Wireless LAN.
➠ When the connection to the wir
eless LAN is completed, the settings congured in the Setup Guide are
applied.
When you exit the Setup Guide, the [Home] screen is displayed.
[Home] Screen(P. 81)
Depending on your wir
eless LAN router, the connection type and security standards may vary. Check for a
connection type and security standard that are supported by both the wireless LAN router and the machine,
Setting Up
32