Canon imageCLASS LBP325dn - Page 202

7. Insert the USB flash drive to USB port of the host machine's rear side.
8. Turn ON the power while pressing down the "<- " , "OK" and "Online" simultaneously.
9. Press the left arrow key or the right arrow key on the Control Panel until the "LOG TO USBMEM" menu is displayed.
BOOTROM XX.XX →/↓
UPDATE:LANC →/↓
UPDATE:USB →/↓
LOG TO USBMEM →/↓
DL-T DATA WRITE
Do not turn the main
power OFF.
7. Troubleshooting
192