Jam name Details
Internal residual jam 1 During warm-up rotation, residual paper was detected by at least one of the following sensors.
• TOP Sensor (PS2)
• Paper Width Sensor (PS21)
• Duplex Feed Sensor (PS22)
• Pre-registration Sensor (PS11)
• Fixing Delivery Sensor (PS13)
• PF Media Path Sensor (PS432)
Internal residual jam 2 During last rotation, residual paper was detected by at least one of the following sensors.
• TOP Sensor (PS2)
• Paper Width Sensor (PS21)
• Duplex Feed Sensor (PS22)
• Pre-registration Sensor (PS11)
• Fixing Delivery Sensor (PS13)
• PF Media Path Sensor (PS432)
Duplex Re-pickup Delay Jam 1 At duplex printing, the TOP Sensor (PS2) does not detect the paper leading edge although a
specified period of time has passed since paper was reversed.
Duplex Feed Delay Jam 1 The Duplex Feed Sensor (PS22) does not detect the paper leading edge although a specified
period of time has passed since Fixing Delivery Sensor (PS13) detected the paper leading edge.
2. Technical Explanation (Device)
47
To Next Page
Loading...
