Chapter 8
8-6
Hardware error.
03130031-2E27
Turn off printer, wait,
then turn on again.
03130031-2F27 Carriage travel timeout Check the carriage unit and surrounding parts.
Hardware error.
03130031-2E1F
Turn off printer, wait,
then turn on again.
03130031-2F1F Pump cam sensor error Check the purge unit.
Hardware error.
03130031-2E2A
Turn off printer, wait,
then turn on again.
03130031-2F2A Unable to detect the feed roller home position Check the feed roller encoder and surrounding part.
Check to see if paper has not jammed.
Hardware error.
03130031-2E29
Turn off printer, wait,
then turn on again.
03010000-2F29 Feed motor timeout (Roll media) Check the roll feed unit. Check roll media. Check to see
if paper has not jammed in the printer.
Hardware error.
03130031-2E2E
Turn off printer, wait,
then turn on again.
03130031-2F2E Roll travel timeout Check the roll feed unit.
Hardware error.
03130031-4027
Turn off printer, wait,
then turn on again.
03130031-4027 Lift travel timeout error Check the carriage unit and surrounding parts.
Hardware error.
03130031-2E13
Turn off printer, wait,
then turn on again.
03130031-2F13 A/D converter external trigger output stop detection
hardware error 1
Replace the new printhead.
Hardware error.
03130031-2F32
Turn off printer, wait,
then turn on again.
03130031-2F32 Multi sensor error Check the environment for interferences from outside
light.
Replace the multi sensor unit.
Hardware error.
03130031-2F3A
Turn off printer, wait,
then turn on again.
03130031-2F3A Valve motor error Check the ink supply unit.
Hardware error.
03130031-2F3B
Turn off printer, wait,
then turn on again.
03130031-2F3B CS communication error Remove the ink tanks and then reload them.
Check the main controller PCB.
Hardware error.
03130031-260E
Turn off printer, wait,
then turn on again.
03130031-260E Gap detection error Check the carriage unit and surrounding parts.
Replace the main controller PCB.
Hardware error.
03130031-2618
Turn off printer, wait,
then turn on again.
03130031-2618 VH voltage error Check the power supply unit.
Hardware error.
03130031-260F
Turn off printer, wait,
then turn on again.
03130031-260F Gap reference surface error Replace the reference surface sheet.
Roll feed unit err
Turn off printer and
check roll feed unit
03060B00-2E24 Roll feed unit failure Replace the roll feed unit.
Unknown file.
Check file format.
Turn off printer, wait a
while, then turn it on
again.
03900001-4049 ROM data for another model has been transferred. Transmit valid ROM data.
Unknown file.
Check file format.
Turn off printer, wait a
while, then turn it on
again.
03900001-4042 MIT data transfer failure Verify the validity of MID data before transferring it.
Display massage Code* Condition detected Action
To Next Page
Loading...
Need help?
General
