• Paper: Roll paper
• Paper type: Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
1. This sets the B Format for and C Paper Size.
Note
• The configuration method varies depending on the OS and application software you are using.
If Page
Setup is displayed in the application menu, the settings are configured by opening the Page
Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select Print from the application software menu.
2. Select the printer in the A Printer list.
3. In the F Paper Size list, click the size of the original. In this case, click 10"x12".
Note
• All sizes are available in borderless printing if you resize originals to match the paper size.
4. If
you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then
select Print from the application software menu.
Enhanced Printing Options
>
Borderless Printing
>
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) iPF815
3
104
To Next Page
Loading...
