Canon imagePROGRAF iPF815 - Printing with Watermarks- COPY, FILE COPY, and so on (Windows)

• Watermark
printing method: Specify whether to print the watermark superimposed or under the document image. You
can also print the watermark only on the first page, if desired.
Note
• Watermarks are supported in Windows.
• In addition to the provided watermarks, you can create up to 50 original watermarks in Windows.
For detailed instructions on printing with watermarks, refer to the following topics:
• Printing with Watermarks— COPY, FILE COPY, and so on (Windows) →P.187
Printing with Watermarks— COPY, FILE COPY, and so on (Windows)
This topic describes how to print with watermarks, based on the following example of printing with a FILE COPY water-
mark.
• Document: Any type
• Page size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in[)
1. Choose Print in the application menu.
2. Select
the printer in the dialog box, and then display the printer driver dialog box.(See "Accessing the Printer Driv-
er Dialog Box from Applications (Windows)
→P.211 ")
3. Make sure the Main sheet is displayed.
Enhanced Printing Options
> Other useful settings >
iPF815 Printing with Watermarks— COPY, FILE COPY, and so on (Windows)
3
187