7. Select the printer from the list in the Printer Browser window and click Add.
Configuring the Destination for TCP/IP Network
Follow the steps below to configure the destination if you will use the printer in a TCP/IP network.
Important
• If you will use the printer in a TCP/IP network, make sure the printer's IP address is configured correctly.
• Configuring the IP Address Using the Printer Control Panel
→P.774
Configuring the Destination (Mac OS X)
Note
• The
following procedures are based on Mac OS X 10.4. The method of configuring the destination varies
depending on the version of Mac OS X. If you use other versions, refer to the help for the Printer Setup
Utility (or the Print Center ).
1. Choose Utilities (or Applications ) in the Go menu of Finder.
2. Click Printer Setup Utility (or Print Center ) in the Utilities folder.
Network Setting
>
Network Setting (Mac OS X)
>
iPF815 Configuring the Destination for TCP/IP Network
10
797
To Next Page
Loading...
