Canon imagePROGRAF iPF815 - Setting the Unit Cost for Paper

3. Click the Overwrite button.
4. Repeat steps 1 to 3 for all the inks.
5. Click the OK button.
Important
• Your settings are not applied until you click the OK button.
Setting the Unit Cost for Paper
Open the Paper sheet. Set the unit cost for paper in this sheet.
1. Select a media type from the Media Type list.
2. Enter the Width and Length of the paper, and the Price per area for the configured width x height.
3. Click the Add button. To change the unit cost for a media type you have already set, click the Overwrite button.
4. Click the OK button.
Windows Software
> Accounting >
Setting the Unit Cost for Paper iPF815
4
396