3. In
the Paper Detailed Settings dialog box displayed next, select the desired settings values in C Between Pages
and D Between Scans in B Drying Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
→P.438
Note
• By factory default, Drying Time is deactivated ( Off ) for all paper types.
• To
have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting Mode
to Eject in the printer menu.
(See "Specifying the Cutting Method for Rolls.")
→P.642
Specifying the Cutting Method for Rolls
How a roll is cut after ejection varies depending on the printer settings.
Cutting Method Menu Settings Driver Setting
Automatic The roll is automatically cut by the Cutter Unit
following printer driver settings.
Cutting
Mode
Automat-
ic
Auto Cut Yes
Eject
→P.643
Choose this setting if you prefer not to have
documents dropped immediately after printing,
as when waiting for ink to dry.
To cut the roll using the Cutter Unit, hold down
the Stop button for a second or more.
Eject Yes
Man-
ual
→P.644
Choose this setting when using media that can-
not be cut using the Cutter Unit.
Cut each page from the roll using scissors. For
continuous printing (if you will cut each page
later), in Auto Cut, select Yes, or select Print
Cut Guideline.
Manual No Yes
Print Cut
Guideline
Handling Paper
>
Handling rolls
>
Specifying the Cutting Method for Rolls iPF815
7
642
To Next Page
Loading...
