7. In the A Page Size list, click the size you registered, My Horizontal Banner.
8. Select the C Enlarged/Reduced Printing check box.
Note
• If
the C Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the
B Borderless Printing check box.
9. Select and click a roll paper in the L Paper Source list.
10. After you click E Fit Roll Paper Width, the Information dialog box is displayed.
11. Select
the width of the loaded roll in the Roll Paper Width list. In this case, click 16-in. Roll (406.4mm), and then
click OK.
12. Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Windows) →P.206 "
Enhanced Printing Options
>
Printing banners or at other non-standard sizes
>
iPF815 Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
3
119
To Next Page
Loading...
