Setting Item Description, Instructions
Paper Manag-
er
Margin Specify the margin around paper. The margin for the trailing
edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in Paper
Details, the value in Paper Details has priority.
Conserve Paper Conserves paper when printing.
Auto Rotate If the long side of an original is shorter than the roll width,
the original is automatically rotated 90 degrees to conserve
paper. Similarly, if the long side of an original in landscape
orientation is longer than the roll width and the short side is
shorter than the roll width, the original is repositioned to fit
on the paper.
HP RTL print jobs are not rotated. Because HP RTL images
are not rotated even if the paper is rotated 90 degrees, images
may be cut off or the blank paper may be ejected. In this
case, set Auto Rotate to Off.
Nesting Use Nesting Selecting On will store print jobs until multiple documents
can be arranged to fill up the roll width, instead of printing
each print job as it is received.
Nesting Wait-
Time
Specify a time to wait until printing, as desired.
Cut Lines Select On to print cut lines between each document on the
roll.
Line & Pen
Manager
Enable merge Specify whether to merge or print over colors where lines
overlap.
Choose Off to print the second line over the first. Choose On
to merge all overlapping colors.
Pen Setup Select Palette As pen values, choose Software, Palette A, Palette B, or
Factory.
Choose Software to print according to software settings.
Choose Palette A or Palette B to print using the value speci-
fied in Define Palette.
Define Palette Specify the Width, Color, and Line Attributes in the pa-
lette Pen no.. Choose Factory to confirm the values when
Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Setting as
the processing for the ends and junctions of lines.
• If you choose No Setting
• If you choose Circle Setting
Reset Palette Restore Define Palette to the default palette settings.
Smoothing Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
Printer Parts
>
Control Panel
>
Main Menu Settings iPF815
9
728
To Next Page
Loading...
Need help?
General
Weight and Dimensions
