Setting Item Description, Instructions
TrimEdge Reload Specify whether to trim the leading edge of the currently
retracted roll when the roll is advanced. Cut the edge if
you are concerned about any marks left on the roll when
the roll is left in the retracted position. Selecting On will
always trim the edge when the roll is advanced from the
retracted position. Selecting Automatic will trim the edge
when the roll has been in the retracted position for two
days or more.
Noz. Check Freq. Specify the timing for automatic checks of nozzle clog-
ging. Choose 1 page to check once per printed page.
Choose 10 pages to check once per ten printed pages.
Choose Automatic to have the printer automatically ad-
just the timing for checks based on the frequency of noz-
zle use.
CarriageScanWdth For specifying the carriage scan width during printing. Se-
lect Automatic for movement equivalent to the width of
paper loaded. Selecting Fixed will reduce any soiling on
the back of the paper, although printing may take a little
longer.
Sleep Timer Specify the period before the printer enters sleep mode.
Length Unit Choose the unit of measurement when roll length is dis-
played. You can switch the unit displayed for Roll Length
Set and the remaining paper amount displayed in the sub-
menu.
Time Zone Specify the time zone. Time zone options indicate a main
city in this time zone and the difference from Greenwich
Mean Time.
Date Format Specify the date format.
Date & Time Date Set the current date.
Time Set the current time. Available only if the Date setting is
specified.
Language Specify the language used on the Display Screen.
Contrast Adj. Adjust the Display Screen contrast level.
Reset PaprSetngs Restores settings that you have changed with Media Con-
figuration Tool to the default values.
Erase HDD Data High Speed Erases file management data for print job data stored on
the printer's hard disk. (See "Erasing Data on the Print-
er's Hard Disk.") →P.750
Secure High Spd. Overwrites the entire hard disk with random data. (See
"Erasing Data on the Printer's Hard Disk.") →P.750
Secure Overwrites the entire hard disk with 00, FF, and random
data (one time each). Verification is performed to check if
the data was correctly written. (See "Erasing Data on the
Printer's Hard Disk.") →P.750
Output Method Print Select the output method.
To print as usual, select Print. Selecting Print (Auto Del)
will print the job and then delete the data from the printer's
hard disk. Selecting Save: Box 01 will only save the print
job in the box, without printing it.
Print (Auto Del)
Printer Parts
>
Control Panel
>
iPF815 Main Menu Settings
9
733
To Next Page
Loading...
Need help?
General
Weight and Dimensions
